Magnetic Hand Tools

Magnetic Hand Tools

A selection of Hand Tools we carry in stock is listed in this section. Knife & Tool Holders, Magnetic Floor Sweepers and Magnetic Lifters are listed in there own section under Magnetic Hardware. Any questions, please feel free to call us on 07 847 8881.

 
7228 Telescopic Pocket Pick-Up Magnet

7228 Telescopic Pocket Pick-Up Magnet

Telescopic Pocket Pick-Up Magnet for retrieving screws, nuts, washers, keys and any smaller ferrous object that is hard to reach. Extends from 145mm to 640mm, has a pocket clip and a small Neodymium Head Magnet that holds 1.3kg. Ideal gift and handy ...

7512 Stud Finder and Vehicle Wrap Magnet

7512 Stud Finder and Vehicle Wrap Magnet

Magnetic Stud Finder, locates nails and metal studs with ease without damage to the wall. Also can be used to hold or position Vehicle Graphics during installation. Encased in Plastic, brightly coloured for ease of identification and will not ...

7524 Screw Driver Magnetizer/Demagnetizer

7524 Screw Driver Magnetizer/Demagnetizer

The Screw Driver Magnetizer locates the steel screw to the end of the screw driver to assist with installation. Insert the screw driver in and out of the + hole in the 7524 and the end is magnetized. To demagnetize, slide the screw driver in and out ...

MS9001 Magnetic Wand designed specifically  for the Funeral Industry

MS9001 Magnetic Wand designed specifically for the Funeral Industry

Magnetic Wand with Pull Handle Release designed specifically for the Funeral Industry. Stainless steel construction with large stainless deflector, shaped to avoid crossover of product when the handle is pulled to release product. Sealed product end ...

MS9002 Magnetic Wand

MS9002 Magnetic Wand

Magnetic Wand for ease of removing metal swarf, screws, nuts, nails, or any small ferrous scrap, and releasing at the pull of the handle. Stainless Steel construction, rubber deflector. 510mm long x 25mm diameter.

7540 Magnetic Bulk Parts Lifter

7540 Magnetic Bulk Parts Lifter

Pick up and Transfer Nails, Screws, Bolts, Nuts or any ferrous metal object. Pull the handle to release the objects in the desired location. Avoids injury from sharp parts, is quick and easy to use. Lifts up to 0.5 kg of 65mm Nails. Permanently ...

ML72 Bulk Parts Lifter with release Handle

ML72 Bulk Parts Lifter with release Handle

Heavy Duty Magnet attracts ferrous metal parts, then a finger tip pull on the release bar drops the entire load in the desired location. Easily transfer bulk metal bolts, nuts, nail, screws, washers, eye bolts, or other ferrous metal items.

7567 Extendable Magnet - Lifts 4.55 kg

7567 Extendable Magnet - Lifts 4.55 kg

Extends from 425mm to 780mm. Has a powerful Neodymium Magnet that lifts 4.55 kg. For retrieving those heavy out of reach Ferrous tools or objects or for starting those awkward bolts that are hard to locate, attach the bolt to the magnet, set and ...

7569 Extendable, Bendable Magnet

7569 Extendable, Bendable Magnet

Extends to 925mm and utilizes a powerful Neodymium Magnet in the tip. The Bendable shaft shapes and reshapes for ease of retrieving hard to reach items. Lifts up to 1.3 kg.

7547 Pick Up Pal - 30 kg of Pull

7547 Pick Up Pal - 30 kg of Pull

Pick up Pal measures 620mm when retracted and with a twist of the handle extends to 1050mm. A large 80mm Magnetic Disc with a Neodymium Magnet controls the collection. Ideal to retrieve those hard to reach items, compact size makes it easy to store. ...

7584 Magnetic Parts Tray

7584 Magnetic Parts Tray

Magnetic Parts Trays, 150mm in diameter x 35mm deep, store ferrous metal parts and tools during assembly and dis-assembly. Each tray is fully magnetized to keep parts securely in place. Can be mount flat, sideways or upside down. Ideal for ...

7585 Magnetic Parts Tray

7585 Magnetic Parts Tray

Magnetic Parts Trays, 150mm in diameter x 35mm deep, store ferrous metal parts and tools during assembly and dis-assembly. Each tray is fully magnetized to keep parts securely in place. Can be mount flat, sideways or upside down. Ideal for ...

AD1037 Magnetic Welding Angle

AD1037 Magnetic Welding Angle

Adjustable Magnetic Welding Angle, holds thick or thin gauge steel securely in place for optimum welding.Powerful magnets are mounted in stainless steel and angles up to 90 degree are attainable. Base is 145mm x 43mm x 31mm thick.

MEC255P Welding Earth Electrode

MEC255P Welding Earth Electrode

Welding Earth Electrode for immediate magnetic contact to the steel being welded. Saves time and makes a direct contact that works every time.

MEC255R Earth Welding Electrode

MEC255R Earth Welding Electrode

Welding Earth Electrode for immediate magnetic contact to the steel being welded. Saves time and makes a direct contact that works every time.

B450W/CAM Magnetic Lifter or Anchor Block

B450W/CAM Magnetic Lifter or Anchor Block

The B450W/CAM Multi Pole Magnetic Block has a mounting hole for attaching to surfaces for work holding and a release cam for ease of removal. Comes complete with a lifting eye and has many uses. Lifts 200kg. Size is 110mm x 75mm x 110mm high ...

M688 Magnetic Gripper

M688 Magnetic Gripper

Powerful Handle Magnets allow a firm grip on steel sheets and plates.Primarily designed for sliding and pulling. A forward push of the handle releases the material. Stainless steel welded construction and heat tolerant to 180 degree Fahrenheit.



Back...